DodgeRam.org > Main > Tech Index > DIY Modifications > Communications Equipment > Brolin Radio Bracket

Brolin CB / 2-Way Radio Mounting Bracket

Visit Geno's Garage
for Truck accessories.		Geno's Garage Truck Accessories

The CB mounting brackets use the existing center seat bolts to hold them in place (no drilling required), are made from 16ga metal and will hold larger CBs. The mounting surface is 8"long by 2" wide. I have 2 styles of brackets. Similar mounts are available from Genos Garage for 2004 through current models.

Brolin Version A:  94-01 Auto transmission, 94-97 Manual transmission.
This bracket is centered with the seat and allows the use of the dash mounted cupholder. It also has clearance for the 4wd lever. The CB face in most cases will be flush with the vinyl/cloth line at the seat front.
 
Brolin Version B:  98-01 Manual transmission.
This bracket is offset to the left side of the seat to still allow access to the floor mounted cupholder. It also will not interfere with the 4wd lever. This bracket has the CB sitting slightly higher as well to clear the tranny tunnel cover.
 
Genos Garage version CB MOUNT ('94-'02 DODGE):
This design works with automatic and standard transmissions.

The CB mounting brackets use the existing center seat bolts to hold them in place (no drilling required). They are made from 16 gauge metal and will hold larger CBs. The mounting surface is 8" long by 2" wide. This bracket allows the use of the dash mounted cup holder. It also has clearance for the 4WD lever. The CB face, in most cases, will be flush with the vinyl/cloth line at the seat front. The brackets are painted satin black for rust protection even though they are not visible.  NOTE: May not work with large CBs in trucks with manual transmissions.

Genos Garage version CB MOUNT ('94-'02 DODGE):
This design works with automatic and standard transmissions.

The CB mounting brackets use the existing center seat bolts to hold them in place (no drilling required). They are made from 16 gauge metal and will hold larger CBs. The mounting surface is 8" long by 2" wide. This bracket allows the use of the dash mounted cup holder. It also has clearance for the 4WD lever. The CB face, in most cases, will be flush with the vinyl/cloth line at the seat front. The brackets are painted satin black for rust protection even though they are not visible.  NOTE: May not work with large CBs in trucks with manual transmissions.

Genos Garage version CB MOUNT ('94-'02 DODGE):
This design works with automatic and standard transmissions.

The CB mounting brackets use the existing center seat bolts to hold them in place (no drilling required). They are made from 16 gauge metal and will hold larger CBs. The mounting surface is 8" long by 2" wide. This bracket allows the use of the dash mounted cup holder. It also has clearance for the 4WD lever. The CB face, in most cases, will be flush with the vinyl/cloth line at the seat front. The brackets are painted satin black for rust protection even though they are not visible.  NOTE: May not work with large CBs in trucks with manual transmissions.

 
Genos Garage version CB MOUNT- NARROW MOUNT ('03-'08 DODGE):

Wide Mount for 4x2 and 4x4 automatic trucks with electronic transfer case shifter on the dash. With this mount, you can mount your radio plus an external speaker, GPS, cell phone or satellite radio receiver. 13” Wide; 10” Tall.

For 4x2 and 4x4 automatic trucks with electronic transfer case shifter on the dash.

CB Wide Mount - DODGE ('03-'08 w/NON-SPORT Console)

 
Genos Garage version CB MOUNT - WIDE MOUNT ('03-'08 DODGE):

Wide Mount for 4x2 and 4x4 automatic trucks with electronic transfer case shifter on the dash. With this mount, you can mount your radio plus an external speaker, GPS, cell phone or satellite radio receiver. 13” Wide; 10” Tall.

For 4x2 and 4x4 automatic trucks with electronic transfer case shifter on the dash.

CB Wide Mount - DODGE ('03-'08 w/NON-SPORT Console)

The brackets are painted satin black for rust protection even though they are not visible.

Contact Bob Wagner at  bob-wagner@msn.com    or   rip@protintnw.com   or  www.sourceautomotive.biz

Last edit to this page: September 24, 2008